Daylight LED Displays

What are you looking for?

Frequently asked questions

The most common questions about the Led2move mobile LED trailer, answered briefly and factually.

Hire & purchase

Can I hire or buy the Led2move?

Both. You can hire the Led2move by the day or by the week, or buy it. If you are considering a purchase, we deduct the hire price of one test week from the purchase price.

What does a Led2move cost?

The price depends on hire or purchase and on the period. You receive a no-obligation tailored quote via the contact page.

What is the Led2move used for?

For safety communication, production and site data, events and brand experience. A single screen can serve several purposes through changing content. See the applications.

How quickly can I hire a Led2move?

Preferably book at least 2 weeks ahead. We deliver to your location and handle setup, configuration and teardown. For last-minute questions, call us directly.

Technology & image

Is the screen readable in full sun?

Yes. The Led2move 4mm reaches 7,500 nit of brightness, more than enough to stay sharp and readable even in direct sunlight.

What does 4.44 mm pixel pitch mean?

The pixel pitch is the centre-to-centre distance between two neighbouring pixels. The smaller the pitch, the finer the image and the closer you can view it sharply. 4.44 mm delivers photo and video quality. Compared to 8 mm or 16 mm, that is four to twenty times finer.

From what distance is the image sharp?

A common rule of thumb is that the pixel pitch in millimetres roughly equals the minimum optimal viewing distance in metres. At 4.44 mm the image is fully smooth from a few metres away; up close you can see the individual pixels.

How large is the screen?

The screen area of the Led2move 4mm is 7.37 m². See the full specifications.

Can the screen stay outside in the rain?

Yes. The Led2move has IP66 protection front and back, works from -30°C to +50°C and withstands wind up to 12 Beaufort. Display, housing and trailer are designed for permanent outdoor use.

Use & setup

How do I control the content?

The content is managed via software. On site, control runs over a network connection (CAT5); remote control is also possible. You can display your own images and video.

What power supply does the Led2move need?

The Led2move consumes on average 995 W (135 W/m²) and a maximum of 3,981 W at full brightness, and runs on an ordinary 16A/230V connection. It comes standard with a diesel generator and SMS alarm on power failure, good for 48+ hours of autonomy.

How is the Led2move delivered and set up?

The Led2move sits on a mobile trailer with adjustable mast height. This makes it quick to deploy on site and lets the viewing height match the setting.

Can I get a demonstration?

Yes. If you are considering a purchase, you can test the Led2move for a week first; we deduct that hire price on purchase. Request a demo via the contact page.

Not finding your question? We are happy to help.

Get in touch